Burr hm ball shape

Description Cut 3 PLUS is cross-cut and is particularly suitable for machining cast iron, steel, stainless steel (INOX), nickel-based and titanium alloys. It is characterized by a high material removal rate. Carbide burrs for universal use are suitable for fine and coarse machining on the most important industrially used materials. They offer good cutting performance and can be used on many materials. Ball-shaped burr according to DIN 8032 with teeth according to DIN 8033. Advantages Good machining capacity due to optimal coordination of carbide, geometry and teeth. High service life. The precise concentricity allows impact-free work without scratches. This significantly reduces wear on tools and machines. High surface quality. Application recommendations For economical use of burrs, machining is carried out in the upper speed/cutting speed range. Use burrs with a shank diameter of 6 mm on machines with a power of 300 watts or higher. Materials to be machined Hard aluminum alloys Stainless steel (INOX) Hardened, tempered steels above 1,200 N/mm² (< 38 HRC) Tool steels Cast iron Cast steel Gray/lamellar/nodular cast iron (GG/GJL, GGG/GJS) Heat-resistant materials Cobalt-based alloys Nickel-based alloys (e.g. Inconel and Hastelloy) High-speed cutting steels Steel Steel, cast steel Steels above 700 N/mm² (> 220 HB) Steels up to 1,200 N/mm² (< 38 HRC) Steels up to 700 N/mm² (< 220 HB) Annealed cast iron White annealed cast iron (GTW, GJMW) Black annealed cast iron (GTS, GJMB) Machining tasks Machining of Surfaces Leveling Milling Deburring Milling Obtaining recesses Welding seam processing Machine types Drive shaft Flexible shaft machine Machine tool Straight grinders Robot Stationary machine