Favero Assioma Duo Power Meter Pedale

Product Description The Assioma Duo - unleash your power based on hard facts. The Assioma Duo power meter pedals by Favero measure power on both sides of the body, i.e. on the left and right leg. In this way, the right-left balance as well as the torque efficiency and concentricity on both sides can be determined. The pedals' ground-breaking technology provides ultra-precise and reliable wattage readings, allowing you to redefine your goals. Based on hard facts, not just estimates, you'll get more out of your pedal strokes and make your training more efficient than ever. The Assioma Duo can be installed as easily as normal pedals and quickly transferred from one bike to another. Communication with your smartphone or bike computer is wireless via Bluetooth or ANT+. As an additional feature that previous versions of the pedal did not have, the release force is continuously adjustable from 8 to 20 Nm. Favero Electronics has over 30 years of experience in the field of electronic sports equipment and works closely with athletes. The Assioma Duo pedals, for example, have been extensively tested by the UCI Team Bardiani-CSF and successfully tried out in tough racing conditions. Information regarding the return of batteries and electrical equipment:Information on the return and disposal of used batteries and electrical equipment can be found here. Specifications:Application:Road, Triathlon & Time TrialType:clipless pedals with power meters (on both sides)Pedal System:FaveroCompatibility:Look KéoTechnical Information:Body Material:CompositeAxle Material:stainless steel (AISI 630 H900)Bearings:cartridgeHeight:10.5 mmPedal Centre to Crank Arm Distance:54 mmTolerance:+/-1 percentPower Source:lithium-ion battery, integratedBattery Life:at least 50 hoursData Collected:current power (0-3000 watts), current cadence (30-190 rpm), left-right balance (0-100 %), torque efficiency, round pedal, IAV Cycling Dynamics (Power Phase, Rider Position)Waterproof:IP67Data Transfer:ANT+, BluetoothApproved For:Weight Limit:120 kg total weight Compatibility:compatible with all Road cranks (9/16" -20 tpi thread), use spacer if necessarycan be combined with round and oval chainringscompatible with all bike computers and smartphones with an ANT+ PWR (Bike Power) profile (CT + PO) or Bluetooth with a CPP profileAssioma App available in the App Store for iOS and Android (one-time activation, firmware updates, crank arm length adjustment, charge status display, information on new functions)other apps based on data sent via ANT+ or Bluetooth like Zwift, The Sufferfest, Strava, Rouvy, Trainerroad etc.recommended cleats: Favero, Look KéoFeatures:exact, reproducible, consistent measurements (on both sides)calibrated by manufacturer, no manufacturer maintenance required (manual zero offset)8 strain gauges around the axletwo USB cables allow simultaneous charging of both pedalsmagnetic pin charging contact prevents damage (no critical openings)charging status warning signal 8 hours before battery is depletedsimplified assembly without special tools (hex wrench)quick change from one bike to anotherAutomatic Temperature Compensation technology (ATC)built-in cadence sensorcompact, no pedal strikesrelease hardness continuously adjustable from 8 to 20 Nmbi-component cover made of synthetic resin for greater robustness and watertightnesssensor housing made of thick, shock-resistant polymer, fibreglass reinforcedpedal body easily removed from pedal axle (with sensor)automatic stand-by after 5 minutes, automatic restartsensor diameter 33.5 mm96 mm pedal width (including axle), 94 mm lengthsealed bearings (3 pcs.)4 LEDs for status displaypermitted operating temperature: -10° C to +60° Cpermitted charging temperature: +5 to +40° Ccharging time: approx. 6 h (with completely discharged battery)Made in Italy Note:Only use the Favero or original Look Kéo cleats supplied. Other cleats are not compatible and may cause damage to the pedal. A minimum distance of 2 mm between the sole and the sensor is recommended (if necessary use a spacer).Technology:Assioma Duo Functionality Power is measured in cycling by relating the force acting on the pedals to the pedalling speed (frequency): power = torque x cadence. Assioma is a pedal for Road cyclists, equipped with a sensor to measure the force applied to the pedal while pedalling. Assioma Duo integrates the cadence function and calculates the power of the individual leg in real time. The right pedal sends its data to the left pedal, which in turn sends the data from both pedals to the bike computer. Favero power meter pedals provide an objective value which, unlike heart rate, cannot be influenced by external factors such as high temperatures, psychological stress, caffeine consumption, etc. Manufacturer Number:772-02 Contents:1 x Favero Assioma pedal body, left1 x Favero Assioma pedal body, right1 x Favero Assioma pedal axle, left, incl. sensor1 x Favero Assioma pedal axle, right, incl. sensor1 pair of Favero cleats 6° (red)2 x USB cable w/ micro-USB plug, 2 m2 x Favero Assioma magnet plug for charging1 x charger1 x EU plug adapter1 x US plug adapter1 x UK plug adapter1 x AU plug adapter1 x 8 mm hex key4 x washers Weight: black: 152 g Manufacturer: FAVERO ELECTRONICS srl Via R.Lombardi 64 31030 Arcade Italy info@favero.com